{"title":"Evolver Family","description":"\u003cdiv class=\"evolver-family\"\u003e\n\u003cp\u003e\u003cstrong\u003eEvolver is a family of Mounts for the VOLTRA I with shared styling and a lean fit.\u003c\/strong\u003e Every Evolver is CNC laser-cut, laser-welded and powder-coated. Pick the Flat Foot for low-profile base tubing, the Standard 3x3 for 3x3 uprights, or the Deep Drop when you need an offset and drop.\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\" border=\"1\" cellpadding=\"6\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eEvolver Standard 3x3\u003c\/th\u003e\n\u003cth\u003eEvolver Flat Foot\u003c\/th\u003e\n\u003cth\u003eEvolver Deep Drop\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack \/ upright fit\u003c\/td\u003e\n\u003ctd\u003e3x3 imperial or metric (incl. 75mm) with 5\/8\" or 1\" push pin (not included)\u003c\/td\u003e\n\u003ctd\u003eFlat Foot base tubing about 2.0–2.3\" tall with 5\/8\" pin holes (push pin not included)\u003c\/td\u003e\n\u003ctd\u003e3x3 with 5\/8\" or 1\" push pin (not included); up to two DIY Docks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePin type \/ options\u003c\/td\u003e\n\u003ctd\u003eSingle Pin or Dual Pin; 5\/8\" or 1\" hole; Mount only or with DIY Dock\u003c\/td\u003e\n\u003ctd\u003ePlate: Standard (non-doubling), 2:1 Cross or 2:1 Inline; 5\/8\" hole; Mount only or with DIY Dock\u003c\/td\u003e\n\u003ctd\u003eSingle Hole; 5\/8\" or 1\" hole; Mount only or with 2 DIY Docks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e4.25\" × 4.43\" × 3\"\u003c\/td\u003e\n\u003ctd\u003e4 1\/4\" × 4 7\/16\" × 2 9\/16\" (3 9\/16\" with DIY Dock)\u003c\/td\u003e\n\u003ctd\u003e9 1\/4\" × 4 3\/16\" × 7\"; 3\" offset, 5\" drop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.85 lb; 2.35 lb with DIY Dock\u003c\/td\u003e\n\u003ctd\u003e1 lb 11.1 oz; 2 lb 3 oz with DIY Dock\u003c\/td\u003e\n\u003ctd\u003e4 lb 7.4 oz; 4 lb 15.2 oz with DIY Dock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/4\" A36 steel, gloss black powder coat\u003c\/td\u003e\n\u003ctd\u003e1\/4\" A36 steel, gloss black powder coat\u003c\/td\u003e\n\u003ctd\u003e1\/4\" A36 steel, gloss black powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhat's included\u003c\/td\u003e\n\u003ctd\u003e6 × M4-0.7 × 10 mm and 4 × M4-0.7 × 12 mm flat-head socket cap screws\u003c\/td\u003e\n\u003ctd\u003e6 × M4-0.7 × 10 mm and 4 × M4-0.7 × 12 mm flat-head socket cap screws\u003c\/td\u003e\n\u003ctd\u003e6 × M4-0.7 × 10 mm and 4 × M4-0.7 × 12 mm flat-head socket cap screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$105; with DIY Dock $145\u003c\/td\u003e\n\u003ctd\u003eStandard $105 \/ 2:1 $115; with DIY Dock $145 \/ $149\u003c\/td\u003e\n\u003ctd\u003e$130; with 2 DIY Docks $190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003e3x3 or 75mm uprights, with styling that matches the Flat Foot.\u003c\/td\u003e\n\u003ctd\u003eLow-profile 2.0–2.3\" base tubing with 5\/8\" holes.\u003c\/td\u003e\n\u003ctd\u003eLow cable starts on 3x3, with room for two DIY Docks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:16px;margin-top:20px\"\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003e\n\u003ca href=\"\/products\/evolver-standard-3x3-1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0794\/5997\/5401\/files\/IMG_6120.jpg?v=1791631691\u0026amp;width=500\" alt=\"Evolver Standard 3x3\" style=\"width:100%\"\u003e\u003ch3\u003eEvolver Standard 3x3\u003c\/h3\u003e\u003c\/a\u003e\u003cp\u003eFrom $105. Single or Dual Pin for 3x3 uprights.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003e\n\u003ca href=\"\/products\/flat-foot-mount\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0794\/5997\/5401\/files\/yLNQ7_aee3fedd-e58c-41cf-9351-2897baf7a187.jpg?v=1784142645\u0026amp;width=500\" alt=\"Evolver Flat Foot\" style=\"width:100%\"\u003e\u003ch3\u003eEvolver Flat Foot\u003c\/h3\u003e\u003c\/a\u003e\u003cp\u003eFrom $105. Low profile for base tubing, with Standard, 2:1 Cross or 2:1 Inline plates.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003e\n\u003ca href=\"\/products\/evolver-deep-drop-mount\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0794\/5997\/5401\/files\/AB0863CE-94D5-4FA6-9D1E-CB65B5301029.jpg?v=1784302006\u0026amp;width=500\" alt=\"Evolver Deep Drop\" style=\"width:100%\"\u003e\u003ch3\u003eEvolver Deep Drop\u003c\/h3\u003e\u003c\/a\u003e\u003cp\u003eFrom $130. Offset and drop, room for two DIY Docks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n","products":[{"product_id":"flat-foot-mount","title":"Evolver Flat Foot","description":"\u003cp dir=\"auto\"\u003eThe \u003cstrong\u003eEvolver Flat Foot \u003c\/strong\u003eMount for Beyond Power VOLTRA I is designed around Rogue Flat Foot racks such as the RML-390F, and it fits any rack whose base tubing has similar dimensions (about 2.0″ to 2.3″ tall) and 5\/8″ pin holes. Standard Mounts are often too tall for the lower 2–2.25\" or even the 2.3\"\/60mm tubing on these racks. This shorter-profile version was built to fit properly, using a standard 5\/8\" push pin (not included) for secure, wobble-free attachment.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe reduced overall height lets the VOLTRA I sit lower and cleaner on flat foot designs without excessive standoff or interference with the rack’s stabilizing feet. It delivers a stable mounting solution and proper cable positioning where universal or 3x3-designed Mounts fall short.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eHave 3x3 uprights too? The \u003ca href=\"\/products\/evolver-standard-3x3-1\"\u003e\u003cstrong\u003eEvolver Standard 3x3\u003c\/strong\u003e\u003c\/a\u003e is its matching Mount, with the same look for your uprights.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eShorter \/ lower profile specifically engineered for 2–2.3\" tubing height\u003c\/li\u003e\n\u003cli\u003eStandard 5\/8\" push pin (not included) for quick, secure installation\u003c\/li\u003e\n\u003cli\u003eTight, stable fit with minimal play on Rogue Flat Foot bases\u003c\/li\u003e\n\u003cli\u003eAllows the VOLTRA I to mount at the correct lower height for better usability\u003c\/li\u003e\n\u003cli\u003eSame rugged construction and finish quality as all Voltra Mounts products\u003c\/li\u003e\n\u003cli\u003ePowder coat finish options available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Evolver Flat Foot is built for lower-profile Flat Foot–style tubing (about 2.0″ to 2.3″). Sizing within that range is done with appropriately sized chafe pads for the size you purchase — not a different metal mount for each tenth of an inch.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e While optimized for Rogue RML-390F \/ RM-390F Flat Foot racks with 2\" tubing and Bells of Steel Residential 2.3\"\/60mm, this mount can also be used on other racks or attachments that use similar lower-profile 2–2.3\" tubing and 5\/8\" pin holes.\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Push pins are not included.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0794\/5997\/5401\/files\/us-flag-inline.png?v=1788361707\" alt=\"United States flag\" width=\"32\" height=\"17\" style=\"vertical-align: -3px; margin-right: 8px; height: 17px; width: 32px;\"\u003e Proudly \u003cstrong\u003emade in the USA\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Voltra Mounts","offers":[{"title":"Standard (non-doubling) \/ 5\/8\" Hole \/ Mount only","offer_id":51251383173353,"sku":"EVFF-STD-58-ND","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Standard (non-doubling) \/ 5\/8\" Hole \/ With DIY Dock","offer_id":51251383140585,"sku":"EVFF-STD-58-DK","price":145.0,"currency_code":"USD","in_stock":true},{"title":"2:1 Cross \/ 5\/8\" Hole \/ Mount only","offer_id":67611013611753,"sku":"EVFF-X21-58-ND","price":115.0,"currency_code":"USD","in_stock":true},{"title":"2:1 Cross \/ 5\/8\" Hole \/ With DIY Dock","offer_id":67611013644521,"sku":"EVFF-X21-58-DK","price":149.0,"currency_code":"USD","in_stock":true},{"title":"2:1 Inline \/ 5\/8\" Hole \/ Mount only","offer_id":67611013677289,"sku":"EVFF-I21-58-ND","price":115.0,"currency_code":"USD","in_stock":true},{"title":"2:1 Inline \/ 5\/8\" Hole \/ With DIY Dock","offer_id":67611013710057,"sku":"EVFF-I21-58-DK","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/5997\/5401\/files\/yLNQ7_aee3fedd-e58c-41cf-9351-2897baf7a187.jpg?v=1784142645"},{"product_id":"evolver-deep-drop-mount","title":"Evolver Deep Drop","description":"\u003cp dir=\"auto\"\u003eThe \u003cstrong\u003eEvolver Deep Drop Mount\u003c\/strong\u003e is a heavy-duty drop arm designed to extend your VOLTRA I mounting point lower on your rack or rig. Part of the Evolver mount product line, this deep drop gives you a full \u003cstrong\u003e6-7\/8\"\u003c\/strong\u003e of drop from the top side of the upright or crossmember to the bottom side of the drop arm.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eKey Features \u0026amp; Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eProvides a generous \u003cstrong\u003e6-7\/8\"\u003c\/strong\u003e total drop for improved pulling angles and range of motion.\u003c\/li\u003e\n\u003cli\u003eAvailable in \u003cstrong\u003e5\/8\" or 1\"\u003c\/strong\u003e rack hole sizes.\u003c\/li\u003e\n\u003cli\u003eIdeal for use with VOLTRA units on power racks, squat racks, and rigs.\u003c\/li\u003e\n\u003cli\u003eMost effective when pulling straight from the VOLTRA I.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eFitment Note: \u003c\/strong\u003ePlease measure your planned installation location carefully before purchasing. \u003cstrong\u003eYou will need at least 7 inches of clear drop\u003c\/strong\u003e from the top of the upright or crossmember to the bottom of the drop arm for this mount to fit properly.  Additionally,\u003cstrong\u003e it is recommended you use a shorter length mag pin\u003c\/strong\u003e such as Titan Fitness or PRx which are \u003cem\u003eno longer than 4.75\".\u003c\/em\u003e  This is recommended since the VOLTRA I is offset a minimal distance from the crossmember and a shorter mag pin doesn't impact the side of the VOLTRA I when locked in the DIY Dock.  Mount may be bolted to rack also.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eImportant Usage Guidelines:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eApproved pulling angle for the Drop Arm is \u003cstrong\u003eperpendicular to the base plate or up to 10 degrees beyond perpendicular up to the maximum weight of the VOLTRA I\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eDoubler plates are \u003cstrong\u003enot approved\u003c\/strong\u003e for installation on the Drop Arm but \u003cstrong\u003ecan be used\u003c\/strong\u003e on the top mounting position if desired.\u003c\/li\u003e\n\u003cli\u003eMaximum Approved Load for the Mount Drop Arm is equal to the maximum resistance weight of the Beyond Power VOLTRA I unit.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eProduct Contents:\u003c\/strong\u003e This listing is for the \u003cstrong\u003eEvolver Deep Drop Mount\u003c\/strong\u003e only. Hardware is included for standard installation. VOLTRA units, doubler plates, push pins and other accessories are sold separately.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eBuilt tough in the USA for serious lifters looking to optimize their VOLTRA I training setup.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0794\/5997\/5401\/files\/us-flag-inline.png?v=1788361707\" alt=\"United States flag\" width=\"32\" height=\"17\" style=\"vertical-align:-3px;margin-right:8px;height:17px;width:32px;\"\u003e Proudly \u003cstrong\u003emade in the USA\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Voltra Mounts","offers":[{"title":"Single Hole \/ 1\" Hole \/ Mount only","offer_id":51534968848617,"sku":"EVDD-1-ND","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Single Hole \/ 1\" Hole \/ With 2 DIY Docks","offer_id":51534968881385,"sku":"EVDD-1-DK2","price":190.0,"currency_code":"USD","in_stock":true},{"title":"Single Hole \/ 5\/8\" Hole \/ Mount only","offer_id":51534968914153,"sku":"EVDD-58-ND","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Single Hole \/ 5\/8\" Hole \/ With 2 DIY Docks","offer_id":51534968946921,"sku":"EVDD-58-DK2","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/5997\/5401\/files\/AB0863CE-94D5-4FA6-9D1E-CB65B5301029.jpg?v=1784302006"},{"product_id":"evolver-standard-3x3-1","title":"Evolver Standard 3x3","description":"\u003cp\u003e\u003cstrong\u003eEvolver Standard 3x3\u003c\/strong\u003e is designed to securely attach your Beyond Power VOLTRA I to any standard 3x3 power rack using a \u003cstrong\u003e1\"\u003c\/strong\u003e or \u003cstrong\u003e5\/8\"\u003c\/strong\u003e push pin (not included). Choose \u003cstrong\u003eSingle Pin\u003c\/strong\u003e or \u003cstrong\u003eDual Pin\u003c\/strong\u003e to suit your rack.\u003c\/p\u003e\n\u003cp\u003eThis Mount is part of the \u003cstrong\u003eEvolver\u003c\/strong\u003e family and shares the lean fit of the \u003cstrong\u003eSingle Pin Tight Spot\u003c\/strong\u003e. It sits tight on the rack, and its slim, low-profile design takes up very little space, so it fits narrow or tight spots on your uprights.\u003c\/p\u003e\n\u003cp\u003eIt's not the \u003cstrong\u003eEvolver Flat Foot\u003c\/strong\u003e. It's a matching Mount made to go with it, so if you want the same look on your 3x3 rack, the Evolver Standard keeps your setup consistent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSingle Pin or Dual Pin\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Pin:\u003c\/strong\u003e attaches through one hole in your upright with one push pin (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Pin:\u003c\/strong\u003e attaches through two holes in your upright with two push pins (not included) for an extra-stable connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRack: standard 3x3\u003c\/li\u003e\n\u003cli\u003eDevice: Beyond Power VOLTRA I\u003c\/li\u003e\n\u003cli\u003ePin type: \u003cstrong\u003eSingle Pin\u003c\/strong\u003e or \u003cstrong\u003eDual Pin\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHole size: \u003cstrong\u003e1\"\u003c\/strong\u003e or \u003cstrong\u003e5\/8\"\u003c\/strong\u003e push pin (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Dock\u003c\/strong\u003e optional (one Dock when that option is selected)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChafe pad shims for a tighter fit and reduced movement\u003c\/li\u003e\n\u003cli\u003eAllen wrench for adjustments\u003c\/li\u003e\n\u003cli\u003eOne \u003cstrong\u003eDIY Dock\u003c\/strong\u003e when that option is selected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhere the Evolver line began\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Evolver Standard was the first Mount in the Evolver line. Its design led to the \u003cstrong\u003eEvolver Deep Drop\u003c\/strong\u003e, the \u003cstrong\u003eInline\u003c\/strong\u003e and \u003cstrong\u003eCross\u003c\/strong\u003e doublers, and others such as the \u003cstrong\u003eSide-by-Side\u003c\/strong\u003e and \u003cstrong\u003eOver-Under\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Push pins are not included. A DIY Dock is included only when that option is selected.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0794\/5997\/5401\/files\/us-flag-inline.png?v=1788361707\" alt=\"United States flag\" width=\"32\" height=\"17\" style=\"vertical-align:-3px;margin-right:8px;height:17px;width:32px;\"\u003eProudly \u003cstrong\u003emade in the USA\u003c\/strong\u003e.\u003c\/p\u003e\n","brand":"Voltra Mounts","offers":[{"title":"Single Pin \/ 5\/8\" Hole \/ Mount only","offer_id":67646906630377,"sku":"EVSTD-SP-58-ND","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Single Pin \/ 5\/8\" Hole \/ With DIY Dock","offer_id":67646906663145,"sku":"EVSTD-SP-58-DK","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Single Pin \/ 1\" Hole \/ Mount only","offer_id":67646906761449,"sku":"EVSTD-SP-1-ND","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Single Pin \/ 1\" Hole \/ With DIY Dock","offer_id":67646906794217,"sku":"EVSTD-SP-1-DK","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Dual Pin \/ 5\/8\" Hole \/ Mount only","offer_id":67646906826985,"sku":"EVSTD-DP-58-ND","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Dual Pin \/ 5\/8\" Hole \/ With DIY Dock","offer_id":67646906859753,"sku":"EVSTD-DP-58-DK","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Dual Pin \/ 1\" Hole \/ Mount only","offer_id":67646906958057,"sku":"EVSTD-DP-1-ND","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Dual Pin \/ 1\" Hole \/ With DIY Dock","offer_id":67646906990825,"sku":"EVSTD-DP-1-DK","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/5997\/5401\/files\/IMG_6120.jpg?v=1791631691"}],"url":"https:\/\/voltramounts.com\/collections\/evolver-family.oembed","provider":"Voltra Mounts","version":"1.0","type":"link"}