Tall Upright
1" Hole / With DIY Dock
$90.00
Sale price
$90.00
Regular price
Skip to product information
Tall Upright
$90.00
Sale price
$90.00
Regular price
Shipping calculated at checkout.
Upright Mount (Bolt-On)
Add a permanent mounting solution to your Beyond Power VOLTRA I workout station with this Upright Mount. It bolts directly onto your rack’s upright or cross member using two bolts that are 1/2" longer than your existing hardware.
Spacing between bolt holes on rack is 6” and two bolts are required to install properly.
The mount can be rotated 180 degrees, and the DIY Dock can be attached to either the top or bottom of the plate. This gives you excellent flexibility in positioning your VOLTRA I exactly where you need it. Two DIY Docks can be mounted at the same time for dual setups when desired.
When purchased with a DIY Dock, one Dock is included.
Note: DIY Docks and bolts are not included.
Proudly made in the USA.
Specifications
| Length | 5.875 in |
|---|---|
| Height | 8.0 in |
| Width | 4.125 in |
| Weight | 2.6313 lb |
| Weight with DIY Dock | 3.1187 lb |
| Offset | 3.5 in |
| Rack fit | Bolt-on 3x3; 1" or 5/8" holes; two holes 6" center to center |
| Material | A36 steel, gloss black powder coat |
| Material thickness | 0.25 in |
| Included hardware | None provided — customer supplies mounting hardware |
| Notes | Weight 2 lb 10.1 oz without dock; 3 lb 1.9 oz with DIY Dock (shown as 2.6313 lb / 3.1187 lb). Height 8 in; width 4 1/8 in at widest point; depth 5 7/8 in. Two mounting holes only, 6 in center to center. Center of bottom hole is 1 3/16 in from the bottom of the plate. Offset is from the face of the mount to the center of the DIY dock (3 1/2 in). Clearance from the mount to the side of the VOLTRA I when installed with the dock on the bottom is 1.5 in (1 1/2 in). A36 steel, 0.250 in thick, gloss black powder coat. No M10 lifting / doubling hole; no carabiner hole. |