Omni Mount - Directional Control Over Cable Pulls — Upwards, Downwards, or Straight Outwards
1" Hole / Don't Include
$135.00
Sale price
$135.00
Regular price
Skip to product information
Omni Mount - Directional Control Over Cable Pulls — Upwards, Downwards, or Straight Outwards
$135.00
Sale price
$135.00
Regular price
Shipping calculated at checkout.
Upright Size (Width × Depth)
The Omni Mount gives you full directional control over your cable pull — upwards, downwards, or straight outwards — in a single mount. No more fighting bad angles or limited movement paths.
Its compact, single pin design makes efficient use of space on your 3x3 power rack while delivering the same precision fit and rock-solid construction as all Voltra Mounts.
Key features:
- 3-way cable pull orientation (parallel, perpendicular, or anywhere in between)
- Clean block-and-tackle attachment point for 2:1 doubling operation for the strait outward pull
- Perfect for Bells of Steel VTS, VTS Lite, Gibbon Arms, RX tornado arms, and others
- Same high-precision fit as all Voltra Mounts
This secure single-pin mount provides a stable connection with quick and easy adjustments during your workout. It saves valuable rack space, reduces the need for extra equipment, and makes your entire VOLTRA I setup far easier to move and reconfigure between locations.
What’s Included:
- Chafe pad shims for a tighter fit and reduced movement
- Allen wrench for adjustments
- When purchasing with DIY Docks, 2 Docks are Included
Proudly made in the USA for serious athletes who demand reliable fit and performance.
Note: The push pin and DIY Docks shown in product images are not included.
Specifications
| Length | 5.75 in |
|---|---|
| Height | 9.125 in |
| Width | 4.5 in |
| Weight | 4.3812 lb |
| Weight with DIY Dock | 5.3625 lb |
| Pin spacing | 3.5 in |
| Rack fit | 3x3 with 5/8" or 1" push pin (not included) |
| Material | A36 steel, gloss black powder coat |
| Material thickness | 0.25 in |
| Included hardware | 6 × M4-0.7 × 10 mm flat-head socket cap screw 4 × M4-0.7 × 12 mm flat-head socket cap screw |
| Notes | Weight 4 lb 6.1 oz without dock; 5 lb 5.8 oz with DIY Dock (shown as 4.3812 lb / 5.3625 lb). Height 9 1/8 in — unchanged with DIY Dock. Pin hole center is 8 1/8 in from top of plate and 1 in from bottom of mount arm. Pin spacing 3 1/2 in. M10×1.5 threaded hole for 2:1 doubling. Separate unthreaded hole for a carabiner. Push pin not included. |