Side-By-Side | Run Two VOLTRA I Parallel w/Upright
1" Hole / Included (2 Docks)
$170.00
Sale price
$170.00
Regular price
Skip to product information
Side-By-Side | Run Two VOLTRA I Parallel w/Upright
$170.00
Sale price
$170.00
Regular price
Shipping calculated at checkout.
Upright Size (Width × Depth)
Side-By-Side Mount
The Side-By-Side lets you run two Beyond Power VOLTRA I units simultaneously on a single rack position one directly next to the other.
Its slim, low-profile design fits neatly into tight or narrow spaces where other mounts simply won’t. When installed, the VOLTRA I is oriented parallel/in-line to the rack upright or crossmember — delivering maximum vertical efficiency while saving valuable rack height.
Note: If you prefer the VOLTRA I oriented perpendicular/horizontal with the upright or crossmember, we also offer the Over-Under Mount.
This secure single-pin mount provides a stable connection with quick and easy height adjustments during your workout. Built with the same precision fit and rock-solid construction as all Voltra Mounts, it eliminates the need for extra equipment or complicated setups while making your entire VOLTRA I system far easier to move and reconfigure between locations.
What’s Included:
- Chafe pad shims for a tighter fit and reduced movement
- Allen wrench for adjustments
Note: The push pin and DIY Docks shown in product images are not included.
Proudly made in the USA for serious athletes who demand reliable fit and performance.
Specifications
| Length | 8.25 in |
|---|---|
| Height | 3.0 in |
| Width | 4.4375 in |
| Weight | 2.775 lb |
| Weight with DIY Dock | 3.7687 lb |
| Pin spacing | 3.5 in |
| Rack fit | 3x3 with 5/8" or 1" push pin (not included) |
| Material | A36 steel, gloss black powder coat |
| Material thickness | 0.25 in |
| Included hardware | 10 × M4-0.7 × 10 mm flat-head socket cap screw |
| Notes | Weight 2 lb 12.4 oz without dock; 3 lb 12.3 oz with two DIY Docks (shown as 2.775 lb / 3.7687 lb). Height 3 in without dock; 4 in with docks. Pin hole center is 2 in from top of top plate and 1 in from bottom of mount. Pin spacing 3 1/2 in. Each DIY Dock has an M10×1.5 threaded hole in the center for doubling. Push pin not included. |