Voltra Mounts Mount Compatibility: Rogue, REP, Titan & Common 3×3
Find your rack brand, see the usual pin size, then measure to confirm.
Voltra Mounts is an independent, privately owned company with no affiliation or connection with Beyond Power or its parent company. Our Mounts are built for the Beyond Power VOLTRA I for individuals using various manufacturers’ 3×3 power racks.
Voltra Mounts designs and manufactures Mounts to use the Beyond Power VOLTRA I on 3×3 power racks. We make Mounts that connect the VOLTRA I to the racks people already own — Rogue, REP, Titan, Beyond Power’s Mini Rack, and others.
Fit comes down to upright size + hole / pin size (and spacing when you need dual-pin or bolt-on). Find your rack in the matrix, note the usual pin size, then confirm with a quick measure before you buy.
Before you shop
- DIY Dock optional (only when you select that option).
- These rows are starting points — measurement confirms.
How to use this matrix
- Find your brand / family.
- Note the usual pin size (1" or 5/8", Flat Foot, special SKU, or Custom Quotes).
- Confirm by measuring hole diameter — How to Measure Your Rack.
- Shop the matching collection or SKU.
- Then pick geometry (drop / Omni / dual-pin / etc.) once pin size is chosen.
Compatibility matrix
| Rack family | Upright / tube | Pin / hole path | What to do |
|---|---|---|---|
| Rogue Monster (RM / Monster 3×3) | True 3×3 | 1" | Typically 1" on Monster-series uprights — confirm by measuring, then shop 1" Mounts. Shop 1" mounts |
| Rogue Monster Lite (RML) | True 3×3 | 5/8" | Typically 5/8" on Monster Lite uprights — confirm by measuring, then shop 5/8" Mounts. Shop 5/8" mounts |
| Rogue Flat Foot base (RML-390F / BOS Residential-class low tube) | Low-profile ~2.0–2.3" (not standard upright height) | Flat Foot SKU · 5/8" | For Flat Foot–style low tubing (~2.0–2.3"), use the Evolver Flat Foot mount (5/8" pin). Standard-height 3×3 Mounts are often too tall. If mounting on the uprights, use the Monster / Monster Lite pin path instead. Evolver Flat Foot |
| Rogue T-Bar Row stand | 3×3 stand | 1" special SKU | Yes — Rogue T-Bar Row Offset Drop (1" single pin). Designed to fit the Rogue T-Bar Row stand. Rogue T-Bar Row Offset Drop |
| REP PR-4000 family | True 3×3 | 5/8" | Typically 5/8" (REP lists 5/8" pinholes) — confirm by measuring. Shop 5/8" mounts |
| REP PR-5000 family | True 3×3 | 1" | Typically 1" (REP lists 1" pinholes; 2" spacing throughout) — confirm by measuring. Shop 1" mounts |
| Bells of Steel Hydra | True 3×3 | 5/8" | Typically 5/8" on Hydra true 3×3 — confirm by measuring. Shop 5/8" mounts |
| Bells of Steel Residential | 2.3" × 2.3" | Flat Foot · 5/8" | Residential is 2.3" × 2.3" with ⅝" holes (BOS). Use Evolver Flat Foot (5/8" pin), not a standard-height 3×3 Mount. Evolver Flat Foot |
| PRx Profile® PRO (current) | True 3×3 | 5/8" | Typically 5/8" — confirm by measuring. Shop 5/8" mounts |
| Titan X-3 Series | True 3×3 | 5/8" path (Titan lists 11/16") | Titan lists 11/16" holes on X-3 — commonly used with 5/8" pins. Confirm with your pin or a hole measure, then shop 5/8" Mounts. Shop 5/8" mounts |
| Titan Series (not X-3) | True 3×3 | 1" | Titan Series uprights use 1" keyholes per Titan’s comparison chart — typically 1"; confirm by measuring, then shop 1" Mounts. Shop 1" mounts |
| Beyond Power Mini Rack | 3×3" 11-gauge | 1" | Typically 1" on listed 3×3 / 1" holes — confirm by measuring. Shop 1" mounts |
| Non-3×3 / oddballs | Varies | Custom Quotes | Don’t force a catalog 3×3 SKU. Request a custom quote. Custom Quotes |
Measure first
These racks need a measure (or Support) before you pick a pin path.
| Rack family | Upright / tube | Stance | What to do |
|---|---|---|---|
| Older PRx Profile (pre–~Sep 2023)Measure-first | True 3×3 | Typically 1" — measure-first | Older PRx uprights often used 1" holes before the shift to 5/8". If you bought before ~Sep 2023 (or aren’t sure), measure first. Measure guide |
| GetRx'd RX3Measure-first | 75×75 mm tube | Measure / Support (~1"/26 mm holes) | RX3 uses 75 mm tube + ~1" (26 mm) holes + 50 mm spacing. Not true imperial 3×3. Measure; ask Support before dual-pin. Custom Quotes / Support |
| Metric 75 mm “3×3-class”Measure-first | 75 mm tube | Hole size decides | 75 mm ≠ imperial 3×3 by default. If holes are 5/8", use Dual Pin’s dedicated 75 mm option where offered; if holes are ~1"/26 mm, treat like GetRx'd care. Match hole size separately from tube. Dual Pin (75 mm option) |
| Unknown / other true 3×3Measure-first | True 3×3 | Measure-first → 1" or 5/8" | Measure hole diameter (or match the pin you already use), then shop 1" or 5/8". Measure guide |
| Titan T-3Measure-first | 2×3 (not default 3×3) | Measure / pad option | T-3 is 2×3, not true 3×3. Do not assume a standard 3×3 pin Mount without checking tube + hole. Custom Quotes |
| RM-390F Monster Flat Foot (base tube note)Measure-first | Monster Flat Foot base (1" upright ecosystem) | Open note — Flat Foot PDP is 5/8" today | Flat Foot PDP lists RM-390F but the live SKU only offers 5/8". Confirm base-hole size vs Monster 1" uprights before ordering. Uprights still follow Monster (1") / Monster Lite (5/8") paths. Flat Foot PDP |
Rack notes by brand
Rogue — Monster vs Monster Lite vs specials
- Monster uprights → typically 1".
- Monster Lite uprights → typically 5/8".
- Flat Foot base tubing (RML-390F context) → Evolver Flat Foot (5/8" pin). Uprights still use Monster / Monster Lite paths.
- T-Bar Row stand → Rogue T-Bar Row Offset Drop (1" special SKU, designed to fit).
REP
- PR-4000 → typically 5/8".
- PR-5000 → typically 1".
Titan
- X-3 → Titan lists 11/16" holes; commonly a 5/8" pin path — confirm by measuring.
- Titan Series (not X-3) → typically 1".
- T-3 → 2×3, not default 3×3.
Bells of Steel
- Hydra → typically 5/8" on true 3×3.
- Residential → Flat Foot · 5/8" (2.3" × 2.3").
PRx
- Current Profile PRO → typically 5/8".
- Older (pre–~Sep 2023) → typically 1" — measure-first.
Beyond Power Mini Rack
Typically 1" on listed 3×3 / 1" holes — confirm by measuring, then shop 1" Mounts.
Metric / GetRx'd / unknown
- GetRx'd RX3 and other 75 mm lines: hole size decides; don’t auto-route to Dual Pin 75 mm unless holes are 5/8".
- Unknown 3×3: measure first.
- Non-3×3 / oddballs: Custom Quotes.
What still matters after you find your rack
- Dual-pin spacing — usually ~2" top-edge to top-edge; confirm on the product page.
- Bolt-on patterns (e.g. Simple Upright 6" centers) — match the product page.
- Shim kit — fine-tunes play on a correct pin size; does not convert 5/8" ↔ 1".
- DIY Dock — optional seating for VOLTRA I when that option is selected.
Related guides
- Will This Voltra Mount Fit My Rack?
- How to Measure Your Rack for Voltra Mounts
- Power Rack Hole Spacing Explained
- Custom Quotes
FAQ
Will Voltra Mounts fit my Rogue Monster?
Typically yes on the 1" path for Monster-series uprights — confirm by measuring, then shop 1" Mounts.
Monster Lite vs Monster — which pin?
Monster Lite is typically 5/8". Monster is typically 1". Same 3×3 tube class; different hardware.
Do Voltra Mounts fit REP PR-4000 / PR-5000?
PR-4000 typically 5/8". PR-5000 typically 1". Confirm by measuring.
Titan X-3 lists 11/16" holes — what do I buy?
Commonly the 5/8" Voltra pin path. Confirm with your pin or a hole measure.
Does Voltra make Mounts for the Beyond Power Mini Rack?
Yes. Specs list 1" holes on listed 3×3 uprights — typically shop 1" Mounts and confirm by measuring.
What if my rack isn’t true 3×3?
Use Custom Quotes. Don’t force a catalog 3×3 SKU.