BLEMISHED Omni Lite Inline

$97.00

Shipping calculated at checkout.

This is a blemished 1″ Omni Lite Inline Mount in gloss black. It has a rough, bubbled coating along the top edge of the back plate.

The blemish is cosmetic only. The Mount works the same as a regular Omni Lite Inline, and the included hardware matches the regular listing.

One of one. Only this single blemished unit is available.

Price is $97 for the Mount only.

Length	4.625 in
Height	7.75 in
Width	4.3125 in
Weight	3.275 lb
Offset	2.5 in
Inside width between legs	3.437"
Rack fit	3x3 with 5/8" or 1" push pin (not included)
Material	A36 steel, gloss black powder coat
Material thickness	0.25 in
Included hardware	10 × M4-0.7 × 10 mm flat-head socket cap screw
Notes	Weight 3 lb 4.4 oz (3.275 lb). Height 7 3/4 in; depth 4 5/8 in; width 4 5/16 in. Pin hole center is 6 3/4 in from the top of the plate and 1 in from the bottom. Offset is from the side plate to the center of the DIY dock (2 1/2 in). Clearance from the mount to the side of the VOLTRA I when installed is 1/2 in. A36 steel, 0.250 in thick, gloss black powder coat. No M10 doubling / lifting hole; no threaded doubling holes; no carabiner hole. Inside width between legs 3.437 in.

Your cart is empty