Which Voltra Mount Do I Need?

Know your Hole/Pin size first. Then pick how the Mount attaches and what cable geometry you want.

Voltra Mounts is an independent, privately owned company with no affiliation or connection with Beyond Power or its parent company. Our Mounts are built for the Beyond Power VOLTRA I for individuals using various manufacturers’ 3×3 power racks.

Voltra Mounts designs and manufactures Mounts to use the Beyond Power VOLTRA I on 3×3 power racks. This page is the geometry chooser — after you already know 1" vs 5/8".

Before you pick a style
Shop 1" Mounts Shop 5/8" Mounts Drop Omni 2:1 Doublers Bolt-on

60-second decision tree

  1. Confirm 1" or 5/8" (or Flat Foot / Rogue T-Bar special path). Measure if unsure.
  2. Want moveable (push pin) or permanent (bolt-on)?
  3. Need standard height, lower / offset cable (drop / offset), or directional control (Omni)?
  4. Need 2:1 now → Inline, Cross, Omni Doubler, or a Doubler Plate on a Mount you already own.
  5. Special station (Flat Foot tubing, Rogue T-Bar stand, compact connection / Hook Up, dual VOLTRA I) → specialized SKUs below.

Pin vs bolt-on

Push-pin Mounts

Repositionable height and location during a session. Most of the catalog. Match the hole size you already confirmed, then pick geometry.

Bolt-on Mounts

Permanent station feel. Example: Simple Upright — 6" centers, two bolts (bolts not included). Browse the bolt-on collection for Tall / Compact / Oval / Side Mount variants.

Start-here Mounts (most buyers)

Single Pin Tight Spot

Slim single-pin Mount for tight rack real estate. Common first Mount once pin size is chosen.

→ Single Pin Tight Spot

Dual Pin (Evolver Dual Pin)

Two-pin stability in tight spots. Dedicated 75 mm option where offered — confirm on the PDP.

→ Evolver Dual Pin · Two-hole collection

Drop & offset (low cable / rows / floor angles)

Lower or offset the cable origin for rows, floor-level work, and better stretch lines. Pin size still comes first; geometry is cable height and offset after that.

Geometry What it’s for Shop
Offset Drop Single-pin offset / lower cable origin beside the upright or crossmember Offset Drop
Double Offset Drop Offset drop for two VOLTRA I units at once Double Offset Drop
Evolver Deep Drop Deep drop arm — about 6-7/8" drop (live PDP); needs clearance under the pin height Evolver Deep Drop

Browse: Drop Mounts · Offset Mounts

Clearance note: Each drop Mount lists its drop distance. Measure free space under your chosen pin height against that spec. Some drop PDPs recommend a shorter mag pin — follow the product page.

Omni family (directional control)

Omni

Directional cable control — up / down / straight out. Directional without being the full Omni Doubler 2:1 product. Dock option includes 2 docks when selected.

→ Omni · Omni product family

Omni Doubler

Omni directional control plus 2:1 on each plane / each end. Single or Dual pin options on this listing. Do not confuse with Omni, Dual Pin Tight Spot, or Doubler Plate.

→ Omni Doubler

Omni Lite Inline / Omni Lite Cross live in the Omni family for lighter directional paths — use when those PDPs match the movement you want.

2:1 doublers (orientation + upgrade paths)

→ Deep dive: VOLTRA 2:1 Doublers Explained

Inline 2:1

VOLTRA I oriented parallel / in-line with the upright or crossmember. PDP claim: true 2:1 felt resistance up to 400 lbs.

→ Inline 2:1 Doubler

Cross 2:1

VOLTRA I oriented perpendicular. Same 2:1 story; pick the orientation that fits rack space and pull path.

→ Cross 2:1 Doubler

Doubler Plate

Bolt-on plate to upgrade an existing compatible Mount (Travel Platform, Darko QuickMount, VoltraMounts, Omni plate types — match the type on the PDP). Not a full rack Mount. Using with Darko or Beyond Power products may affect that manufacturer’s warranty — check with them.

→ Doubler Plate · 2:1 Doublers collection

Name trap (don’t mix these)

If you want… Get… Don’t confuse with…
Directional only Omni Omni Doubler
Directional + 2:1 each plane Omni Doubler Omni · Dual Pin Tight Spot
Fixed-orientation 2:1 Inline or Cross Omni
2:1 on a Mount you already own Doubler Plate (correct plate type) Buying a whole new rack Mount unnecessarily
Two pins in a tight spot Evolver Dual Pin Omni Doubler’s dual-pin option
Compact connection (leg press, Smith, barbell, landmine, etc.) The Hook Up A rack Mount

Specialized stations (short)

Flat Foot

Low-profile Flat Foot–style tubing (~2.0–2.3") → Evolver Flat Foot (5/8" pin path on the live SKU). Standard-height 3×3 Mounts are often too tall for that base tube. Uprights still use the normal 1" / 5/8" pin path from the compatibility page.

Rogue T-Bar Row stand

Special SKU: Rogue T-Bar Row Offset Drop — 1" single pin, designed to fit the Rogue T-Bar Row stand and drop the VOLTRA I low.

The Hook Up

Used for leg presses, Smith machines, barbells, and any situation where you want a compact connection between the VOLTRA I and your device. Not a rack Mount. Pairs with the Rogue T-Bar Row Mount path and other setups that need that low stack.

→ The Hook Up

Dual VOLTRA I / other bolt-ons

  • Side-By-Side — two VOLTRA I units side by side on one pin position
  • Dual Voltra Plate — adapter for two VOLTRA I units on the Rogue T-Bar Offset Drop Mount
  • Over-Under — dual path with perpendicular / stacked orientation (see PDP)
  • Facility / non-3×3 / oddballs → Custom Quotes

What every order still needs you to decide

  • Hole / pin size: 1" or 5/8" (or Flat Foot / Rogue T-Bar special path)
  • Mount only vs With DIY Dock (if you don’t already own a dock; Omni / some dual paths include 2 docks when that option is selected)
  • Push / mag pin source — not included with the Mount
  • Shim kit arrives for fine-tune on a correct pin size (does not convert 5/8" ↔ 1")

USA-made. Precision fit. Follow each PDP for inclusions and options.

Example first-buy paths

Labelled as examples, not ranked bestsellers:

  1. General first Mount: Single Pin Tight Spot in the correct pin size (+ Dock if needed).
  2. Want permanence: Simple Upright / bolt-on collection.
  3. Rows / floor angles: Offset Drop or Evolver Deep Drop family.
  4. Cable direction flexibility: Omni → Omni Doubler if you also want 2:1.
  5. Already have a Mount, want 2:1: Doubler Plate (right plate type).
  6. Rogue T-Bar stand: Rogue T-Bar Row Offset Drop (+ Hook Up for a compact connection).

Related guides

Still unsure? Email Support@voltramounts.com with a photo of your upright face and holes, or request a custom quote.

I know my pin size — shop 1" Shop 5/8" Custom Quotes

FAQ

Which Voltra Mount should I buy first?

Confirm 1" vs 5/8" (measure if unsure). Most buyers start with a single-pin Mount such as Single Pin Tight Spot. Add DIY Dock if you don’t have one. Choose drop / Omni / doubler based on the movements you want.

Should I get a pin Mount or a bolt-on?

Pin = repositionable. Bolt-on = permanent station — example Simple Upright with 6" bolt spacing.

What’s the difference between Omni and Omni Doubler?

Omni = directional cable control. Omni Doubler = that directional control plus 2:1 on each plane / each end.

Do I need a doubler?

Only if you want true 2:1 / higher felt resistance. Choose Inline, Cross, Omni Doubler, or a Doubler Plate on an existing compatible Mount.

Inline vs Cross 2:1 — which one?

Inline orients the VOLTRA I parallel / in-line with the upright or crossmember; Cross orients it perpendicular. Same 2:1 idea; pick the orientation that fits your rack space and pull path.

Does the Mount include a push pin or DIY Dock?

Push / mag pin is not included. DIY Dock is included only when you select that option (count varies by product — Omni’s dock option includes two).

What’s Flat Foot vs a standard Mount?

Flat Foot–style low tubing (~2.0–2.3") needs Evolver Flat Foot. Standard-height 3×3 Mounts are often too tall for that base tube.

Rogue T-Bar stand — which Mount?

Rogue T-Bar Row Offset Drop (1" special SKU). Add The Hook Up for a compact connection (leg press, Smith, barbell, landmine, and similar) — Hook Up is not a rack Mount.