Omni

Omni

1" Hole / With 2 DIY Docks
$195.00
$195.00
Skip to product information
Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
  • Omni
Omni

Omni

$195.00
$195.00
Shipping calculated at checkout.
Hole Size
Choose: DIY Dock
Upright Size (Width × Depth)

How upright size works

Our mount designs stay the same. Fit for other upright sizes comes from sized chafe pads when you pick that option. Pick the size that matches your rack so the pads ship ready to fit.

For fine-tune on a standard 3×3, see shim kit installation.

Upright Size Width × Depth: top-down tubing cross-section. Depth is front-to-back of the tube, not rack height.
Width × Depth — top-down tubing cross-section; Depth is front-to-back of the tube (not rack height)

The Omni Mount gives you full directional control over your cable pull — upwards, downwards, or straight outwards — in a single mount.  No more fighting bad angles or limited movement paths.

Its compact, single pin design makes efficient use of space on your 3x3 power rack while delivering the same precise fit as all Voltra Mounts. 

Key features:

  • 3-way cable pull orientation (parallel, perpendicular, or anywhere in between)
  • Clean block-and-tackle attachment point for 2:1 doubling operation for the strait outward pull
  • Perfect for Bells of Steel VTS, VTS Lite, Gibbon Arms, RX tornado arms, and others
  • Same high-precision fit as all Voltra Mounts

This secure single-pin mount provides a stable connection with quick and easy adjustments during your workout. It saves valuable rack space, reduces the need for extra equipment, and makes your entire VOLTRA I setup far easier to move and reconfigure between locations.

What’s Included:

  • Chafe pad shims for a tighter fit and reduced movement
  • Allen wrench for adjustments
  • When purchasing with DIY Docks, 2 Docks are Included

United States flag Proudly made in the USA for serious athletes who demand reliable fit and performance.

Note: The push pin and DIY Docks shown in product images are not included.
Specifications
Length5.75 in
Height9.125 in
Width4.5 in
Weight4.3812 lb
Weight with DIY Dock5.3625 lb
Inside width between legs3.437"
Rack fit3x3 with 5/8" or 1" push pin (not included)
MaterialA36 steel, gloss black powder coat
Material thickness0.25 in
Included hardware6 × M4-0.7 × 10 mm flat-head socket cap screw
4 × M4-0.7 × 12 mm flat-head socket cap screw
NotesWeight 4 lb 6.1 oz without dock; 5 lb 5.8 oz with DIY Dock (shown as 4.3812 lb / 5.3625 lb). Height 9 1/8 in — unchanged with DIY Dock. Pin hole center is 8 1/8 in from top of plate and 1 in from bottom of mount arm. Inside width between legs 3.437 in. M10×1.5 threaded hole for 2:1 doubling. Separate unthreaded hole for a carabiner. Push pin not included.

You may also like