The Bolt Up Rotator

Coming soon! The Bolt Up Rotator is almost ready. We're still finalizing the description and options, so some details may change. Sign up for notifications and we'll let you know the moment it's available.

The Bolt Up Rotator is a bolt-on base for a push pin mount. It clamps to a square tube the same way The Bolt Up does, and it accepts a separate push-pin Mount (not included). Positioning blocks let you set that Mount at 0°, 30°, or 60°, and the Mount rotates around its push pin.

How it compares

• The Bolt Up is a bolt-on Mount with The DIY Dock on the plate face.
• The Bolt Up Rotator is a bolt-on base that accepts a separate push-pin Mount and uses positioning blocks for 0°, 30°, or 60°.

Fit

• Attaches to square tubes from 1" up to 3" wide with four 5/16"-18 bolts using two nut plates.
• The positioning block is sized for a 1" push-pin Mount hole.
• The DIY Dock is included only when the With DIY Dock option is selected.

What’s included

• The Bolt Up Rotator
• One set of four 5/16"-18 bolts in your choice of 1", 3", or 4" length
• Four flat washers and four split lock washers
• Two 2-hole nut plates in your choice of 2" or 3"
• The DIY Dock, only when the With DIY Dock option is selected
• Tool needed: 1/4″ Allen wrench (not included)

Note: The push-pin Mount and push pin are not included.

Choose your tube width and pin direction

The Bolt Up Rotator has two base versions. Both fit 2" and 3" tubes, but they position the push pin (not included) differently. That pin is the axis your Mount rotates around.

Turning a base 90° changes which tube width it fits, and whether the pin runs parallel, along the tube, or perpendicular, across the tube. To get the opposite pin direction on the same tube, choose the other base version.

Measure your tube width, decide which way you want your Mount to rotate, then choose your base. Your 0° or 30°/60° positioning block is a separate choice.

The Bolt Up Rotator — Hole Pattern & Dimensions

Four 0.332 in round mounting holes. Inside edge-to-inside edge: horizontal top 3.3307 in; horizontal bottom 3.3315 in; vertical, both sides 2.1677 in. Center-to-center: horizontal top 3.6627 in; horizontal bottom 3.6635 in; vertical, both sides 2.4997 in.

Open The Bolt Up Rotator mounting-hole dimensions full-size

Proudly made in the USA.