Omni Doubler

Omni Doubler

Single Hole / 5/8" Hole / With 2 DIY Docks
$205.00
$205.00
Skip to product information
Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
  • Omni Doubler
Omni Doubler

Omni Doubler

$205.00
$205.00
Shipping calculated at checkout.
Mounting Holes
Hole Size:
Choose: DIY Dock
Upright Size (Width × Depth)

How upright size works

Our mount designs stay the same. Fit for other upright sizes comes from sized chafe pads when you pick that option. Pick the size that matches your rack so the pads ship ready to fit.

For fine-tune on a standard 3×3, see shim kit installation.

Upright Size Width × Depth: top-down tubing cross-section. Depth is front-to-back of the tube, not rack height.
Width × Depth — top-down tubing cross-section; Depth is front-to-back of the tube (not rack height)

The Omni Doubler is part of the Omni family. It offers the same directional cable-pull control as the original Omni Mount — upwards, downwards, or straight outwards — on a standard 3x3 rack for the Beyond Power VOLTRA I. Choose Single Pin or Dual Pin, and a 1" or 5/8" push pin (not included).

In addition, it is a 2:1 doubler. There is a doubler on each plane / each end of the mount, so for any directional cable pull you are pursuing, you can double that resistance through the mount.

Fit and options

  • Rack: standard 3x3
  • Device: Beyond Power VOLTRA I
  • Cable pull: upwards, downwards, or straight outwards
  • Pin type: Single Pin or Dual Pin — 1" or 5/8" push pin (not included)
  • DIY Docks: optional. When that option is selected, two Docks are included.

What’s included

  • Chafe pad shims for a tighter fit and reduced movement
  • Allen wrench for adjustments
  • Two DIY Docks when that option is selected

Note: The push pin (not included) does not ship with the mount. DIY Docks are included only when that option is selected. The VOLTRA I and DIY Docks shown in product images are not included unless that option is selected.

United States flag Proudly made in the USA.
Specifications
Length7.25 in
Height9.9375 in
Width4.4375 in
Weight5.2375 lb
Weight with DIY Dock6.2375 lb
Inside width between legs3.437"
Rack fit3x3 with 5/8" or 1" push pin (not included)
MaterialA36 steel, gloss black powder coat
Material thickness0.25 in
Included hardware10 × M4-0.7 × 10 mm flat-head socket cap screw
NotesWeight 5 lb 3.8 oz without dock; 6 lb 3.8 oz with two DIY Docks (shown as 5.2375 lb / 6.2375 lb). Height 9 15/16 in — unchanged with DIY Dock. Pin hole center is 8 15/16 in from top and 1 in from bottom of mount. Inside width between legs 3.437 in. Two M10×1.5 threaded holes for mounting eyes if desired. Two round carabiner holes, 3/4 in (0.75 in) diameter. Push pin not included.

You may also like