Over-Under

Over-Under

1" Hole / Mount only
$105.00
$105.00
Skip to product information
Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under – included shim kit: 0.25 mm, 0.5 mm and 1.0 mm shims, M4 screws and 2.5 mm Allen wrench
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
  • Over-Under
Over-Under

Over-Under

$105.00
$105.00
Shipping calculated at checkout.
Hole Size
Choose: DIY Dock
Upright Size (Width × Depth)

How upright size works

Our mount designs stay the same. Fit for other upright sizes comes from sized chafe pads when you pick that option. Pick the size that matches your rack so the pads ship ready to fit.

For fine-tune on a standard 3×3, see shim kit installation.

Upright Size Width × Depth: top-down tubing cross-section. Depth is front-to-back of the tube, not rack height.
Width × Depth — top-down tubing cross-section; Depth is front-to-back of the tube (not rack height)

Over-Under Mount

The Over-Under Mount lets you run two Beyond Power VOLTRA I units simultaneously on a single rack position by stacking one directly above the other.

Its slim, low-profile design fits neatly into tight or narrow spaces where other mounts simply won’t. When installed, the VOLTRA I is oriented perpendicular/horizontal to the rack upright or crossmember — delivering maximum vertical efficiency while saving valuable rack height.

Note: If you prefer the VOLTRA I oriented parallel / in-line with the upright or crossmember, we also offer the Side-by-Side Mount.

This secure single-pin mount provides a stable connection with quick and easy height adjustments during your workout. Built with the same precise fit as all Voltra Mounts, it eliminates the need for extra equipment or complicated setups while making your entire VOLTRA I system far easier to move and reconfigure between locations.

What’s Included:

  • Chafe pad shims for a tighter fit and reduced movement
  • Allen wrench for adjustments

United States flag Proudly made in the USA for serious athletes who demand reliable fit and performance.

Note: The push pin and DIY Docks shown in product images are not included.
Specifications
Length8.25 in
Height3.0 in
Width4.4375 in
Weight2.775 lb
Weight with DIY Dock3.7687 lb
Pin spacing3.5 in
Rack fit3x3 with 5/8" or 1" push pin (not included)
MaterialA36 steel, gloss black powder coat
Material thickness0.25 in
Included hardware6 × M4-0.7 × 10 mm flat-head socket cap screw
4 × M4-0.7 × 12 mm flat-head socket cap screw
NotesWeight 2 lb 12.4 oz without dock; 3 lb 12.3 oz with two DIY Docks (shown as 2.775 lb / 3.7687 lb). Height 3 in without dock; 4 in with docks. Pin hole center is 2 in from top of top plate and 1 in from bottom of mount. Pin spacing 3 1/2 in. Each DIY Dock has an M10×1.5 threaded hole in the center for doubling. Push pin not included.

You may also like